FSX - Aerosoft Innsbruck LOWI Airport V1.10 66
Click Here --->>> https://tiurll.com/2tzSLq
Review: FSX - Aerosoft Innsbruck LOWI airport v1.10 66
If you are looking for a challenging and scenic destination for your flights in FSX, you might want to check out the Aerosoft Innsbruck LOWI airport v1.10 66. This add-on recreates the famous Austrian airport in high detail, with realistic buildings, textures, lighting, and animations. It also includes a custom mesh and photorealistic scenery for the surrounding area, which features the stunning Alps mountains and valleys.
Innsbruck is known as one of the most difficult airports in Europe, due to its location in a narrow valley, surrounded by high terrain and often affected by strong winds and low visibility. The airport has a single runway that is only 6,562 feet long, and requires a steep approach angle of 3.77 degrees for landing. Pilots also have to deal with noise abatement procedures and complex airspace restrictions. To make things even more challenging, the airport has no instrument landing system (ILS), and relies on a localizer/distance measuring equipment (LOC/DME) approach for runway 08, or a circling approach for runway 26.
The Aerosoft Innsbruck LOWI airport v1.10 66 add-on captures the essence of this challenging airport, and provides a realistic and immersive experience for FSX pilots. The airport is modeled with accurate and detailed 3D objects, such as terminals, hangars, towers, bridges, vehicles, and static aircraft. The textures are crisp and clear, with seasonal variations and night lighting effects. The add-on also features dynamic animations, such as moving jetways, ground services, windsocks, flags, and birds.
The scenery also covers the surrounding area of Innsbruck, with a custom mesh that enhances the elevation and shape of the terrain. The scenery includes photorealistic textures that blend well with the default FSX scenery, and show the roads, rivers, lakes, forests, and urban areas of the region. The scenery also includes custom landmarks, such as castles, churches, stadiums, ski resorts, and bridges. The scenery is compatible with other add-ons that enhance the Alps region, such as Orbx FTX Global or FTX Vector.
The Aerosoft Innsbruck LOWI airport v1.10 66 add-on is a must-have for FSX pilots who enjoy flying in challenging and scenic environments. The add-on offers a high-quality rendition of the famous Austrian airport and its surroundings, with realistic features and effects that enhance the realism and immersion of the simulation. The add-on is easy to install and configure, and comes with detailed documentation and charts that help you plan your flights and navigate the complex airspace. Whether you fly a small propeller plane or a large jetliner, you will find plenty of excitement and beauty in this add-on.
To test the Aerosoft Innsbruck LOWI airport v1.10 66 add-on, I decided to fly a Boeing 737-800 from Munich to Innsbruck, using the default FSX weather and ATC. I followed the real-world procedures and charts for the flight, and used the LOC/DME approach for runway 08. The flight was about 40 minutes long, and gave me a good opportunity to enjoy the scenery and the challenge of the airport.
The flight from Munich to Innsbruck was smooth and uneventful, with clear skies and light winds. I was able to admire the Alps scenery along the way, and spot some of the landmarks that are included in the add-on. As I approached Innsbruck, I contacted the tower and received clearance for the LOC/DME approach. I tuned the localizer frequency and set the course to 81 degrees. I also set the altitude bug to 6,500 feet, which is the minimum descent altitude for the approach.
The LOC/DME approach requires a high level of precision and concentration, as you have to follow a specific path and speed to reach the runway. You also have to monitor the distance from the airport, which is indicated by the DME on your radio panel. The approach has several waypoints that mark different segments of the path, such as KPT, RTT, OEV, and KOGOL. You have to adjust your heading and altitude according to these waypoints, and make sure you don't deviate from the localizer or descend below the minimum altitude.
The approach was challenging and exciting, as I had to fly through a narrow valley with high mountains on both sides. I also had to deal with some crosswinds and turbulence that made the plane drift slightly from the localizer. I had to constantly correct my heading and speed to stay on course and avoid overshooting or undershooting the runway. I also had to keep an eye on the DME, which showed me how far I was from the airport. As I reached KOGOL, which is 4.3 nautical miles from the runway, I lowered the landing gear and flaps, and reduced my speed to 140 knots.
The final segment of the approach was the most difficult and thrilling part of the flight. I had to make a steep descent at a 3.77 degree angle, while maintaining alignment with the runway. I also had to avoid some obstacles that are close to the runway threshold, such as a highway bridge and a ski jump tower. The runway itself was short and narrow, and required a precise touchdown and braking. I managed to land safely on runway 08, with a smooth flare and a firm braking action. I exited the runway at taxiway B1, and contacted ground control for parking instructions.
The Aerosoft Innsbruck LOWI airport v1.10 66 add-on provided me with an enjoyable and memorable flight experience in FSX. The add-on delivered a high level of realism and immersion, with detailed and accurate features that recreated the airport and its surroundings. The add-on also offered a great challenge for my piloting skills, with a complex and demanding approach that tested my precision and concentration. The add-on is definitely worth buying if you are looking for a new destination that combines beauty and difficulty in FSX. 061ffe29dd